Newbie switch modded - tinfoil failed install (2024)

Hi forum guru’s.
After some help for a tinfoil installation.
I have installed mod on switch using Hecate boot and atmos cfw.
I used YouTube guide for tinfoil installation and signs.
Extracted and placed both on root of sd card.

Problem I have is once I boot into atmos, I have no tinfoil to install, it is not there.
Again I extracted the tinfoil ins to sd card as well as sig files.
Any thoughts?

Many Thanks
Wayne

DarknessPlay3r said:

Though I'm not a tinfoil fan myself (I use goldleaf). You never mentioned, did you get into the homebrew menu by opening the album folder while holding down R?

Click to expand...

See Also

Tinfoil Installer Not WorkingTinfoil Failed to install NSPTinfoil failed to install

Huh? By default, holding R on the album, will open the real album. If you hold R to open the homebrew menu, then you did some voodoo that a newb wouldn't even begin to think of doing...

urherenow said:

Huh? By default, holding R on the album, will open the real album. If you hold R to open the homebrew menu, then you did some voodoo that a newb wouldn't even begin to think of doing...

Click to expand...

Hi all, still unsure what is going on.
Tinfoil ins is within the switch folder on the root of the sd card.
I launch Hecate, then payload fuse.bin.
Enter album, everything is in album, I.e. gold leaf, home brew, etc, but no tinfoil?

warleyboy said:

Hi all, still unsure what is going on.
Tinfoil ins is within the switch folder on the root of the sd card.
I launch Hecate, then payload fuse.bin.
Enter album, everything is in album, I.e. gold leaf, home brew, etc, but no tinfoil?

Click to expand...

Tinfoil obviously is not installed correctly. remove all the files it added, if you used the homebrew menu/shop to get tinfoil remove/uninstall it from there, go get the tinfoil files from the github and install tinfoil manually either by usb in hekate, or by removing your SD card and moving the files over. Not sure why you're the only one having this issue, you're obviously missing something.

warleyboy said:

Hi all, still unsure what is going on.
Tinfoil ins is within the switch folder on the root of the sd card.
I launch Hecate, then payload fuse.bin.
Enter album, everything is in album, I.e. gold leaf, home brew, etc, but no tinfoil?

Click to expand...

because you put the .nsp in there instead of the .nso installer. Use Goldleaf to install the .nsp.

urherenow said:

because you put the .nsp in there instead of the .nso installer. Use Goldleaf to install the .nsp.

Click to expand...

Or... just use the Tinfoil self-installer like said here:

spoggi said:

Just use Tinfoil Nro self installer
Copy Tinfoil folder to Switch folder
Then install Tinfoil from album

Click to expand...

You just get the self-installer from the Tinfoil website and press the NRO Self-Installer download button. Also, make sure you have the proper sigpatches installed.

Just let me know if you need help putting the files on your SD card.

vaugerbird said:

Or... just use the Tinfoil self-installer like said here:

You just get the self-installer from the Tinfoil website and press the NRO Self-Installer download button. Also, make sure you have the proper sigpatches installed.

Just let me know if you need help putting the files on your SD card.

Click to expand...

Dude already downloaded the .nsp, so there's no good reason to download it a second time. You're not really helping at this point.

urherenow said:

Dude already downloaded the .nsp, so there's no good reason to download it a second time. You're not really helping at this point.

Click to expand...

The download could be broken, or bad. a corrupted file. If you swear you are doing everything else right, then the next likely culprit is usually the file it's self. It's not pointless. Unless you actually try it, you can't check it off the list. lol

JayBae said:

The download could be broken, or bad. a corrupted file. If you swear you are doing everything else right, then the next likely culprit is usually the file it's self. It's not pointless. Unless you actually try it, you can't check it off the list. lol

Click to expand...

It could be, but nobody knows that, not even him. it takes a couple of seconds to open Goldleaf to see if it was the .nso that he put in there, and then install it. It takes considerably longer to go find and download the .nro, get it on his card, then launch CFW again, to launch the installer.

The "most likely reason" that it doesn't show up in the HBmenu, is that it's an nso file. You freaking newbs need to stop contradicting those of us who have been here forever compared to you. You don't know what the hell you're talking about, and your assumptions are childish.

Hello All,

So I put the nsp inside the switch folder, installed with gold leaf.
I now get the attached fatal error upon injecting the fusee.bin payload.
Appreciate any help with this.

warleyboy said:

Hello All,

So I put the nsp inside the switch folder, installed with gold leaf.
I now get the attached fatal error upon injecting the fusee.bin payload.
Appreciate any help with this.

Click to expand...

Hi forum guru’s, not had much response since my last post, should I be looking at removing everything I’ve installed and start again. If so could you point me in the right direction.

warleyboy said:

Hi forum guru’s, not had much response since my last post, should I be looking at removing everything I’ve installed and start again. If so could you point me in the right direction.

Click to expand...

Struggling with what to do next guys n girls. Any help appreciated.

warleyboy said:

Hi forum guru’s.
After some help for a tinfoil installation.
I have installed mod on switch using Hecate boot and atmos cfw.
I used YouTube guide for tinfoil installation and signs.
Extracted and placed both on root of sd card.

Problem I have is once I boot into atmos, I have no tinfoil to install, it is not there.
Again I extracted the tinfoil ins to sd card as well as sig files.
Any thoughts?

Many Thanks
Wayne

Click to expand...

Maybe there's an issue with the files (it happened to me) try this it's a nice pack that Chaosta did for me, just add the tinfoil installer and you are good to go